Jawa Tips

The fingers are pretty easy to make. Metal coat hangers are probably available at your home but they are quite rigid and are tough to bend so try using solid copper wire (not twisted pair!). Cut the wire and poke it in the pad to create the base for the fingers.

To achieve bulk in the fingers, cut some flexible tubing and place it over the finger wires. Fill the tubes with hot glue. Once the glue dries, use a hobby knife and cut the knuckles for added posablility.

This is not show in the image to the right, but use a smaller diameter for the pinky. This finger should be thinner than the rest, like the pinky on your own hand.